[ Home | Resume | Research | Publication | Course | Facility | Students | Work Gallery | Cool&Cute Photos ]

Thesis

International Journal

  1. Hyungjun Park, "B-spline surface fitting based on adaptive knot placement using dominant columns", Computer-Aided Design, Vol. 43, No. 3, pp. 258-264, 2011 [PDF]
  2. Hyungjun Park et al., "Immersive Modeling System(IMMS) for Personal Electronic Products using Multi-modal Interface", Computer-Aided Design, Vol. 42, No. 5, pp. 387-401, 2010 [PDF]
  3. Jae Yeol Lee, Gue Won Rhee, and Hyungjun Park, "AR/RP-based tangible interactions for collaborative design evaluation of digital products", International Journal of Advanced Manufacturing Technology, Vol. 45, No. 7-8, pp. 649-665, 2009 [PDF]
  4. Hyungjun Park, Hee-Cheol Moon, Jae Yeol Lee, "Tangible augmented prototyping of digital handheld products", Computers in Industry, Vol. 60, No. 2, pp. 114-125, 2009 [PDF]
  5. Wen-Ke Wang, Hui Zhang, Hyungjun Park, Jun-Hai Yong, Jean-Claude Paul, Jia-Guang Sun, "Reducing control points in lofted B-spline surface interpolation using common knot vector determination", Computer-Aided Design, Vol. 40, No. 10-11, pp. 999-1008, 2008 [PDF]
  6. Hyungjun Park, Jeong-Soo Son, and Kwan-Heng Lee, "Design evaluation of digital consumer products using VR-based functional behavior simulation", Journal of Engineering Design, Vol. 19, No. 4, pp. 359-375, 2008 [PDF] (Best Paper Award)
  7. Hyungjun Park and Dong-Gyu Ahn, "Knowledge-based CNC torch path generation for laser cutting of planar shapes", International Journal of Advanced Manufacturing Technology, Vol. 37, No. 3-4, pp. 302-313, 2008 [PDF]
  8. Dong-Gyu Ahn, Min-Su Kim, Young-Tae Yoo, and Hyungjun Park, "Effects of process parameters on surface characteristics in cutting of cold rolled steel sheets using a high-power CW Nd:YAG laser", Materials Science Forum, Vol. 580-582, pp. 455-458, 2008 [PDF]
  9. Hyungjun Park and Joo-Haeng Lee, "B-spline curve fitting based on adaptive curve refinement using dominant points", Computer-Aided Design, Vol. 39, No. 6, pp. 439-451, 2007 [PDF]
  10. Dong-Gyu Ahn and Hyungjun Park, "Investigation into thermal characteristics in cutting of a low carbon sheet using a high-power CW Nd:YAG laser for net shape manufacturing", Key Engineering Materials, Vol. 344, pp. 169-176, 2007 [PDF]
  11. Hyungjun Park and Joo-Haeng Lee, "B-spline curve fitting using dominant points", Lecture Notes on Computer Science, Vol. 3992, pp. 362-366, 2006 (Short Paper) [PDF]
  12. Joo-Haeng Lee and Hyungjun Park, "Geometric properties of ribs and fans of a Bezier curve", Journal of Computer Science and Technology, Vol. 21, No. 2, pp. 279-283, 2006 (Invited Paper) [PDF]
  13. Hyungjun Park and Joo-Haeng Lee, "Error-bounded B-spline curve approximation based on dominant point selection", International Journal of Computer Graphics & CAD/CAM, Vol.1, No. 1, pp. 27-36, 2005 (Invited Paper) [TOC]
  14. Dong-Go Jang, Hyungjun Park, and Kwangsoo Kim, "Surface offsetting using distance volumes", International Journal of Advanced Manufacturing Technology, Vol. 26, No. 1-2, pp. 102-108, 2005 [PDF]
  15. Joo-Haeng Lee and Hyungjun Park, "Ribs and fans of Bezier curves and surfaces", Computer-Aided Design and Applications, Vol. 2, No. 1-4, pp. 125-134, 2005 [TOC]
  16. Hyungjun Park, "A hybrid approach to smooth surface reconstruction from 2D cross-sections", International Journal of Advanced Manufacturing Technology, Vol. 25, No. 11-12, pp. 1130-1136, 2005 [PDF]
  17. Hyungjun Park, "Error-bounded biarc approximation of planar curves", Computer-Aided Design, Vol. 36, No. 12, pp. 1241-1251, 2004 [PDF]
  18. Hyungjun Park, "Optimal single biarc fitting and its applications", Computer-Aided Design and Applications, Vol. 1, No. 1-4, pp. 187-195, 2004 [TOC]
  19. Hyungjun Park, Hyung Bae Jung, Kwangsoo Kim, "A new approach for lofted B-spline surface interpolation to serial contours", International Journal of Advanced Manufacturing Technology, Vol. 23, No. 11-12, pp. 889-895, 2004 [PDF]
  20. Hyungjun Park, "An error-bounded approximate method for representing planar curves in B-splines", Computer Aided Geometric Design, Vol. 21, No. 5, pp. 479-497, 2004 [PDF]
  21. Hyungjun Park, "A solution for NURBS modeling in aspheric lens manufacture", International Journal of Advanced Manufacturing Technology, Vol. 23, No. 1-2, pp. 1-10, 2004 [PDF]
  22. Hyungjun Park, "Lofted B-spline surface interpolation by linearly constrained energy minimization", Computer-Aided Design, Vol. 35, No. 14, pp. 1261-1268, 2003 [PDF]
  23. Hyungjun Park, "Choosing nodes and knots in closed B-spline curve interpolation to point data", Computer-Aided Design, Vol. 33, No. 13, pp. 967-974, 2001 [PDF]
  24. Hyungjun Park, "An approximate lofting approach for B-spline surface fitting to functional surfaces", International Journal of Advanced Manufacturing Technology, Vol. 18, No. 7, pp. 474-482, 2001 [PDF]
  25. Hyungjun Park, Kwangsoo Kim, and Sang-Chan Lee, "A method for approximate NURBS curve compatibility based on multiple curve refitting", Computer-Aided Design, Vol. 32, No. 4, pp. 237-252, 2000 [PDF] [MORE]
  26. Jaehun Jeong, Kwangsoo Kim, Hyungjun Park, and Mooyoung Jung, "A new method for solving branching problems in surface reconstruction", International Journal of Advanced Manufacturing Technology, Vol. 16, No. 4, pp. 259-264, 2000 [PDF]
  27. Jaehun Jeong, Kwangsoo Kim, Hyungjun Park, Hyunbo Cho, and Mooyoung Jung, "B-spline surface approximation to cross-sections using distance maps", International Journal of Advanced Manufacturing Technology, Vol. 15, No. 12, pp. 876-885, 1999 [PDF]
  28. Hyungjun Park and Kwangsoo Kim, "Smooth surface approximation to serial cross-sections", Computer-Aided Design, Vol. 28, No. 12, pp. 995-1005, 1996 [PDF] (Best International Journal Paper Award from Samsung Electronics)
  29. Hyungjun Park and Kwangsoo Kim, "An adaptive method for smooth surface approximation to scattered 3D points", Computer-Aided Design, Vol. 27, No. 12, pp. 929-939, 1995 [PDF]
  30. Hyungjun Park and Kwangsoo Kim, "3D shape reconstruction from 2D cross-sections", Journal of Design and Manufacturing, Vol. 5, No. 3, pp. 171-185, 1995 [MORE]

International Conference Proceedings

  1. Joo-Haeng Lee and Hyungjun Park, "Note on B-spline Volume Representation of Measured BRDF Data", Proceedings of 2010 Asian Conference on Design & Digital Engineering (ACDDE), August 25-28, 2010, Jeju, Korea
  2. Hyungjun Park and Hee-Cheol Moon, "Note on Augmented Reality-based Tangible Interaction using a Finger Fixture", Proceedings of 2010 Asian Conference on Design & Digital Engineering (ACDDE), August 25-28, 2010, Jeju, Korea
  3. Hyung-Wook Park, Myong-Soo Kim, and Hyungjun Park, "Dental Implant Surgery Simulation in VR using the Haptic Device", Abstract Proceedings of the 88th General Session & Exhibition of the International Assortiation for Desntal Research (IADR), July 14-17, 2010, Barcelona, Spain (Poster Presentation)
  4. Joo-Haeng Lee and Hyungjun Park, "B-Spline representation of measured BRDF for photorealistic rendering", Proceedings of the 3rd Korea-China Joint Conference on Geometric and Visual Computing (KCJC), August 22-24, 2007, Seoul, Korea
  5. Hyungjun Park and Hee-Cheol Moon, "Tangible augmented prototyping of digital handheld products", Proceedings of the 3rd Korea-China Joint Conference on Geometric and Visual Computing (KCJC), August 22-24, 2007, Seoul, Korea
  6. Hyungjun Park, Jeong-Soo Son, and Kwan-Heng Lee, "Design evaluation of digital consumer products using VR-based functional behavior simulation", Presented at International CAD Conference, June 25-29, 2007, Honolulu, Hawaii
  7. Joo-Haeng Lee and Hyungjun Park, "A note on morphological development and transformation of Bezier curves based on ribs and fans", Proceedings of ACM Solid and Physical Modeling Symposium (SPM), June 4-6, 2007, Beijing, China [PDF]
  8. Dong-Gyu Ahn and Hyungjun Park, "Investigation into thermal characteristics in cutting of a low carbon sheet using a high-power CW Nd:YAG laser for net shape manufacturing", Proceedings of the 12th International Conference on Sheet Metal (SheMet), April 1-4, 2007, Palermo, Italy
  9. Hyungjun Park and Joo-Haeng Lee, "B-spline curve fitting using dominant points", LNCS Proceedings of International Conference on Computational Science (ICCS), May 28-31, 2006, Reading, United Kingdom
  10. Dong-Gyu Ahn, Hyungjun Park, and Young-Tae Yoo, "A study on the influence of process parameters on the part quality in cutting of CSP 1N using high power CW Nd:YAG laser for net shape manufacturing", Proceedings of International Congress on Laser Advanced Materials Processing (LAMP), May 16-19, 2006, Kyoto, Japan
  11. Joo-Haeng Lee and Hyungjun Park, "Morphological development and transformation of Bezier curves based on ribs and fans", Proceedings of IJCC Workshop on Digital Engineering, pp. 39-46, February 8-9, 2006, Pyungchang, Korea
  12. Joo-Haeng Lee and Hyungjun Park, "Geometric properties of ribs and fans of a Bezier curve", Proceedings of the 1st Korea-China Joint Conference on Geometric and Visual Computing (KCJC), August 24-26, 2005, Busan, Korea (Best Paper Award)
  13. Hyungjun Park and Dong-Gyu Ahn, "Knowledge-based CNC torch path generation for laser cutting of planar shapes", Proceedings of the 1st Korea-China Joint Conference on Geometric and Visual Computing (KCJC), August 24-26, 2005, Busan, Korea
  14. Hyungjun Park and Joo-Haeng Lee, "Error-bounded B-spline curve approximation based on dominant point selection", Proceedings of International Conference of Computer Graphics, Imaging and Vision (CGIV), July 26-29, 2005, Beijing, China
  15. Joo-Haeng Lee and Hyungjun Park, "Ribs and fans of Bezier curves and surfaces", Proceedings of International CAD Conference, June 20-24, 2005, Bangkok, Thailand
  16. Hyungjun Park, "Optimal single biarc fitting and its applications", Proceedings of International CAD Conference, May 24-28, 2004, Pattaya Bearch, Thailand
  17. Hyung Bae Jung, Hyungjun Park, Kwangsoo Kim, "A new method for B-spline surface skinning", Proceedings of IJCC International Symposium, August 21-23, 2003, Jeju, Korea
  18. Hyungjun Park, "A solution for improving product data interoperability in aspheric lens manufacture", Proceedings of APIEMS, pp. 767-770, December 18-20, 2002, Taipei, Taiwan
  19. Jaehun Jeong, Kwangsoo Kim, and Hyungjun Park, "Solving branching problems for surface reconstruction from free-form contours", Proceedings of ASME Design Engineering Technical Conference, September 12-15, 1999, Las Vegas, Nevada, USA, DETC99/CIE-9114 [ABSTRACT]

Domestic Journal

  1. Hyungjun Park and Hee-Cheol Moon, "AR-based Tangible Interaction Using a Finger Fixture for Digital Handheld Products", Transactions of the Society of CAD/CAM Engineers, 16(1), pp. 1-10, 2011 (in Korean)
  2. Joo-Haeng Lee, Sung-Soo Kim, and Hyungjun Park, "Comparing BRDF models: representation of measured BRDF", Transactions of the Society of CAD/CAM Engineers, 14(5), pp. 346-354, 2009 (in Korean)
  3. Joo-Haeng Lee and Hyungjun Park, "B-spline volume BRDF representation and application in physically-based rendering", Transactions of the Society of CAD/CAM Engineers, 13(6), pp. 469-477, 2008 (in Korean) (Best Paper Award at Gaheon Academic Achievement Awards Competition, 2009)
  4. Hyungjun Park and Hee-Cheol Moon, "Design evaluation of portable electronic products using AR-based interaction and simulation", Transactions of the Society of CAD/CAM Engineers, 13(3), pp. 209-216, 2008 (in Korean)
  5. Joo-Haeng Lee and Hyungjun Park, "Control of morphological development and transformation of curves", Transactions of the Society of CAD/CAM Engineers, 12(5), pp. 354-365, 2007 (in Korean)
  6. Hyungjun Park and Dong-Gyu Ahn, "CNC torch path generation for laser cutting of planar shapes", Transactions of the Society of CAD/CAM Engineers, 12(3), pp. 153-162, 2007 (in Korean)
  7. Hyungjun Park, Chae-Yeol Bae, and Kwan-Heng Lee, "Virtual prototyping of consumer electronic products by embedding HMI functional simulation into VR techniques", Transactions of the Society of CAD/CAM Engineers, 12(2), pp. 87-94, 2007 (in Korean)
  8. Hyungjun Park, "3D shape model construction using medical images", CAD/CAM Review, 13(1), pp. 36-47, 2007 (in Korean)
  9. Joo-Haeng Lee and Hyungjun Park, "Ribs and fans of Bezier curves and surfaces", Transactions of the Society of CAD/CAM Engineers, 11(4), pp. 246-255, 2006 (in Korean) (Gaheon Academic Achievement Award, 2007)
  10. Dong-Gyu Ahn, Min-Su Kim, Hyungjun Park, and Young-Tae Yoo, "Influence of process parameters on the surface roughness and the striation formation of the cut section for the case of cutting of CPS 1N sheet using high power CW Nd:YAG laser", Journal of the Korean Society of Precision Engineering, 23(7), pp. 30-38, 2005 (in Korean)
  11. Hyungjun Park and Joo-Haeng Lee, "B-spline curve approximation based on adaptive selection of dominant points", Transactions of the Society of CAD/CAM Engineers, 11(1), pp. 1-10, 2006 (in Korean)
  12. Dong-Gyu Ahn, Min-Su Kim, Sang-Hoon Lee, Hyungjun Park, and Young-Tae Yoo, "Influence of process parameters on the kerfwidth for the case of laser cutting of CPS 1N sheet using high power CW Nd:YAG laser", Journal of the Korean Society of Precision Engineering, 22(7), pp. 19-26, 2005 (in Korean)
  13. Hyungjun Park, "CAD/CAM applications for manufacturing aspheric lenses of optical products", Optics and Technology (Optical Society of Korea), 8(2), pp. 14-21, 2004 (in Korean)
  14. Hyungjun Park and Kwangsoo Kim, "Approximate lofting by B-spline curve fitting based on energy minimization", Transactions of the Society of CAD/CAM Engineers, 4(1), pp. 32-42, 1999 (in Korean) [ABSTRACT]
  15. Hyungjun Park and Kwangsoo Kim, "3D shape reconstruction from 2D cross-sections", Journal of the Korean Society of Precision Engineering, 10(4), pp. 81-93, 1993 (in Korean)
  16. Kwangsoo Kim, Hyungjun Park, Cheol-Han Kim, and Jin-Ho Kim, "Development of a GT coding system for POSCO", Journal of RIST Research, 7(3), pp. 550-560, 1993 (in Korean) [ABSTRACT]

Domestic Conference Proceedings

  1. Sang-Jin Park, Hyung-Wook Park, and Hyungjun Park, "Human Identification Using Dental Image Processing With Neural Networks", Proceedings of SCCE Conference, January 26-28, 2011, Pyungchang, Korea
  2. Hyung-Wook Park, Sang-Jin Park, Myong-Soo Kim, and Hyungjun Park, "Computerized Planning of Dental Implant Placement Using Geometric Processing of 3D Models", Proceedings of SCCE Conference, January 26-28, 2011, Pyungchang, Korea
  3. Joo-Haeng Lee, Sung-Soo Kim, Hyungjun Park, "Comparing BRDF Models: Representation of Measured BRDF", Proceedings of SCCE Conference, February 4-6, 2009, Pyungchang, Korea
  4. Hee-Cheol Moon and Hyungjun Park, "Dealing with Hand Region Occlusion in Augmented Reality Based Virtual Prototyping of Handheld Products", Proceedings of SCCE Conference, February 4-6, 2009, Pyungchang, Korea
  5. Hyung-Wook Park, Myong-Soo Kim, and Hyungjun Park, "Dental Implant Surgery Simulation Using Tangible User Interface", {Proceedings of SCCE Conference, February 4-6, 2009, Pyungchang, Korea (Best Poster Presentation Award)} AND {Proceedings of KIIE Conference, November 8, 2008, Seoul, Korea}
  6. Hyung-Wook Park, Hyungjun Park, Sang-Hwa Jung, and Myong-Soo Kim, "Generation of drilling information from medical image for dental implant surgery", Proceedings of SCCE Conference, January 31-February 2, 2008, Pyungchang, Korea
  7. Hee-Cheol Moon, Hyung-Wook Park, and Hyungjun Park, "Valid region estimation of argument reality based tangible interaction", Proceedings of SCCE Conference, January 31-February 2, 2008, Pyungchang, Korea
  8. Joo-Haeng Lee and Hyungjun Park, "Application of B-spline volume BRDFs for physically-based rendering", Proceedings of SCCE Conference, January 31-February 2, 2008, Pyungchang, Korea (Best Paper Award)
  9. Joo-Haeng Lee and Hyungjun Park, "Control of morphological development and transformation of curves", Proceedings of SCCE Conference, January 31-February 2, 2007, Pyungchang, Korea
  10. Jungsu Son, Chae-Yeol Bae, and Hyungjun Park, "Active sensing based tangible interaction for virtual prototyping of portable electronic products", Proceedings of SCCE Conference, January 31-February 2, 2007, Pyungchang, Korea
  11. Hyungjun Park and Hee-Cheol Moon, "Design evaluation of portable electronic products using AR-based interaction and simulation", Proceedings of SCCE Conference, January 31-February 2, 2007, Pyungchang, Korea (Best Paper Award)
  12. Hyungjun Park, Chae-Yeol Bae, and Kwan-Heng Lee, "Virtual prototyping of consumer electronic products by embedding HMI functional simulation into VR techniques", Proceedings of SCCE Conference, pp. 397-403, February 9-10, 2006, Pyungchang, Korea
  13. Hyungjun Park, Chae-Yeol Bae, Hee-Cheol Moon, Kwan-Heng Lee, "Virtual prototyping of portable consumer electronic products based on HMI functional simulation", Proceedings of IE/MS Joint Conference, pp. 854-861, May 14, 2005, Cheongju, Korea
  14. Sang-Wook Na, Jeong-Soo Son, and Hyungjun Park, "3D geometric model generation based on a stereo vision system using random pattern projection", Proceedings of IE/MS Joint Conference, pp. 848-853, May 14, 2005, Cheongju, Korea
  15. Sang-Wook Na, Chae-Yeol Bae, and Hyungjun Park, "3D geometric model generation based on a stereo vision system", Proceedings of SCCE Conference, pp. 639-644, January 28, 2005, Pyungchang, Korea
  16. Joo-Haeng Lee and Hyungjun Park, "Ribs and fans of Bezier curves and surfaces", Proceedings of SCCE Conference, pp. 276-285, January 28, 2005, Pyungchang, Korea
  17. Hyungjun Park and Joo-Haeng Lee, "B-spline curve approximation based on adaptive selection of dominant points", Proceedings of SCCE Conference, pp. 259-266, January 28, 2005, Pyungchang, Korea
  18. Sang-Wook Na, Chae-Yeol Bae, and Hyungjun Park, "3D geometric model generation based on a stereo vision system", Proceedings of KIIE Conference, November 13, 2004, Seoul, Korea
  19. Dong-Gyu Ahn, Min-Su Kim, Sang-Hoon Lee, Hyungjun Park, and Young-Tae Yoo, "Influence of process parameters on the kerfwidth for the case of laser cutting of CPS 1N sheet using high power CW Nd:YAG laser", Proceedings of KSME Fall Conference, pp. 910-915, November 3, 2004, Daejeon, Korea (Best Paper Award)
  20. Hyungjun Park, Sangwook Na, and Chaeyeol Bae, "Composite G1 surface construction from 2D cross-sections", Proceedings of IE/MS Joint Conference, May 21-22, 2004, Jeonju, Korea
  21. Hyungjun Park, "A new approach for optimal single biarc fitting", Proceedings of SCCE Conference, pp. 457-461, February 12-14, 2004, Pyungchang, Korea
  22. Hyungjun Park and Sangwook Na, "An approach for composite surface construction from 2D cross-sections", Proceedings of KSMPE Autumn Conference, November 15, 2003, Gwangju, Korea
  23. Hyungjun Park, Hyung Bae Jung, Kwangsoo Kim, "A new approach for B-spline surface interpolation to contours", Proceedings of IEMS Joint Conference, May 16-17, 2003, Pohang, Korea
  24. Hyungjun Park, "B-spline curve approximation to 2D functional curves", Proceedings of KIIE Conference, pp. 405-409, October 12, 2002, Seoul, Korea
  25. Hyungjun Park and Dae Young Kong, "ALIS - a dedicated system for designing and manufacturing aspheric lenses", Proceedings of SCCE Conference, pp. 247-252, February 9, 2001, Seoul, Korea
  26. Hyungjun Park, "An approximate method for NURBS representation of aspheric lens surfaces", Proceedings of KIIE Conference, November 4, 2000, Seoul, Korea
  27. Hyungjun Park, "Choosing parameters and knots for closed B-spline curve interpolation to point data", Proceedings of SCCE Conference, pp. 203-208, February, 2000, Seoul, Korea
  28. Hyungjun Park, "An approximate method for NURBS surface lofting and its applications", Proceedings of Industrial Information Research Society(IIRS) Special Conference, November, 1999, Suwon, Korea
  29. Hyungjun Park, Kwangsoo Kim, and Sang-Chan Lee, "A method for approximate NURBS curve compatibility and its applications", Proceedings of KIIE Conference, pp. 352-357, October, 1999, Seoul, Korea [ABSTRACT]
  30. Hyungjun Park et al., "VX vision", Proceedings of SCCE Conference, pp. 193-198, February, 1999, Seoul, Korea (Special Award in the 2nd CAD/CAM Software Contest, Korean Society of CAD/CAM Engineers)
  31. Jaehun Jeong, Kwangsoo Kim and Hyungjun Park, "B-spline surface approximation to cross-sections using distance maps", Proceedings of KIIE Conference, pp. 710-715, October, 1998, Seoul, Korea [ABSTRACT]
  32. Hyungjun Park and Kwangsoo Kim, "B-spline surface approximation to serial 2D contours", Proceedings of SCCE Conference, pp. 40-45, February 13, 1996, Seoul, Korea
  33. Jaehun Jeong, Hyungjun Park and Kwangsoo Kim, "Zigzag tool path generation using neural networks", Proceedings of SCCE Conference, pp. 79-84, February 13, 1996, Seoul, Korea
  34. Hyungjun Park and Kwangsoo Kim, "3D surface approximation to serial 2D cross sections", Proceedings of KSPE Conference, pp. 719-724, November, 1995, Seoul, Korea
  35. Hyungjun Park and Kwangsoo Kim, "Shape design using skinning and branching techniques", Proceedings of KIIE Conference, pp. 565-576, October, 1994, Suwon, Korea
  36. Hyungjun Park and Kwangsoo Kim. "An adaptive method for smooth surface approximation to scattered 3D points", Proceedings of KIIE Conference, pp. 516-525, October, 1993, Seoul, Korea
  37. Hyungjun Park and Kwangsoo Kim, "3D shape reconstruction from 2D cross-sections", Proceedings of KIIE Conference, pp. 129-138, October, 1992, Seoul, Korea (Best Student Paper Award)
  38. Hyungjun Park and Kwangsoo Kim, "Recognition of handwritten numeric characters using a neuro-vision system", Proceedings of KIIE Conference, October, 1991, Seoul, Korea

Technical Reports

  1. Hyungjun Park, "NURBS approximation of functional surfaces of revolution", Industrial Technology Research (Chosun University), 28(2), 2006 (in Korean)
  2. Hyungjun Park, "G1 arc spline approximation of planar curves", Industrial Technology Research (Chosun University), 27(1), pp. 53-61, 2005 (in Korean)
  3. Sang-Wook Na, Chae-Yeol Bae, and Hyungjun Park, "3D shape model generation based on a stereo vision system", Industrial Technology Research (Chosun University), 26(2), pp. 65-76, 2004 (in Korean)
  4. Hyungjun Park and Kwangsoo Kim, "A method for approximate NURBS curve compatibility and its applications", Industrial Technology Research (Chosun University), 25(2), pp. 99-110, 2003
  5. Hyungjun Park, "Development of a dedicated system for designing and manufacturing aspheric lenses", Industrial Technology Research (Chosun University), 23(1), pp. 77-86, 2001 (in Korean)

Invited Talks

  1. Hyungjun Park, "Design evaluation of digital consumer products using VR/AR-based interaction and functional simulation", POSTECH, April 25, 2007, Pohang, Korea
  2. Hyungjun Park, "3D shape model construction using medical images", Theories and Applications Study Group for CAD/CAM Engineers, November 17, 2006, Seoul, Korea
  3. Hyungjun Park, "HMI functional modeling of portable electronic products", Theories and Applications Study Group for CAD/CAM Engineers, May 26, 2006, Seoul, Korea
  4. Hyungjun Park, "CAD/CAM technologies in manufacturing plastic aspheric lenses for optical products", Institute for Advanced Engineering (IAE), February 9, 2006, Yongin, Korea
  5. Hyungjun Park, "Surface modeling and applications", GIST, June 7, 2004, Gwangju, Korea
  6. Hyungjun Park, "CAD/CAM technologies in manufacturing plastic aspheric lenses for optical products", POSTECH, November 9, 2001, Pohang, Korea
  7. Hyungjun Park, "CAD/CAM and reverse engineering", Gwangju University, November 24, 2000, Gwangju, Korea
  8. Hyungjun Park, "3D shape construction from measurement data", Theories and Applications Study Group for CAD/CAM Engineers, December 19, 1997, Seoul, Korea
[ Home | Resume | Research | Publication | Course | Facility | Students | Work Gallery | Cool&Cute Photos ]